RAPID INCINERATOR up to 950degree

.high-speed heating-up time
.for single and series
.incineration of solids and liquid substances

atform has 8 recesses with a diameter of 35 mm which can accommodate porcelain crucibles of up to 50 mm diameter for drying, pre-heating and fuming-off. The uninhibited exposure to oxygen speeds up the incineration process. The inclined position of the crucibles in the lower incinerating bed (which has a length of 400 mm) allows excellent observation and access to the contents during operation. Modern design, easy to operate, reliable, space-saving and of very good value.

Equipment for SV/II (not illustrated):
The upper part and the main housing are made of high-grade stainless steel, the housing comes with an orange finish (RAL 2002). There is a built-in, 120 minute timing switch fitted with a buzzer signal to indicate when the desired time has been reached, or the switch can be placed in the permanently ON position. The appliance is fitted with a safety switch which cuts off the mains supply to the heater immediately the service flap is opened. When the flap is closed, power is restored to the element. The ready-to-use apparatus is delivered complete with a 1.8 m cable and Schuko plug.

Order No.:SV / II
voltage:230 - 240 V, 50-60 Hz
performance:2500 Watt
width and depth:450 mm x 180 mm
height:310 mm
max. crucible diameter:50 mm
max. crucible height:50 mm
weight:7,4 kg
Order No. spare heating element:EH 400

The right to make modifications serving further technical development,  is reserved

Further Fabrications
High temperature TITANIUM hot plate up to 600degree - CERAN heating plates to 500degree - Electronic DIGITAL hot plates to 450degree - Precision hot plates - Stand hot plates with supporting rod - Multi-purpose, extremely deep, heating bath - sand bath -Series heating units - Multipurpose heating equipment - Water-and Oil baths  - Development - Special orders.