9210MkII-000
USS-9210MkII complete system (can operate soldering tip diameters 1 - 5mm)
Microprocessor controlled Ultrasonic Soldering System complete with 15W standard hand tool (9200-101) including 3mm soldering tip, toolstand, foot-switch, connecting cable, users manual and a sample set of all available Cerasolzer active solder alloy
> This system is prepared for the upgrade for operation with hot gas function for increased heat supply to the substrate. Picture shows USS-9210MkII upgraded with ASC-9000 and 9200-107). Upgrade if required at a later stage.
Fields of Applications
In production, research and development
.laboratories
.Surface technology
.Ceramic colors
.Sensors
.Flat glass production
.Optical glasses
.Solar cells
.Hermetic sealing
.Semiconductors
.Liquid crystals
.Superconductors
.Ceramic thick- and thin-film substrates
15W Soldering Hand Tools and Robot Head
9200-101:
15W standard ultrasonic hand tool (plastic moulding)
incl. soldering tip at your choice 1mm - 5mm.
Without connecting cable
9200-106:
15W ultrasonic soldering hand-tool with compressed air fitting for cooling of the vibration unit only, incl.
soldering tip at your choice 1mm - 5mm.
Diameter of tube air hose 4mm.
Without connecting cable.(We recommend to use with ASC9000 air supplycontroller)
9200-107:
15W ultrasonic soldering hand-tool with compressed air fitting for cooling of vibration unit and enhanced heating of tip, incl. airtight
heater holder for hot blow function and soldering tip at your choice 1mm - 5mm.
Diameter of tube air hose 4mm.
Without connecting cable(We recommend to use with ASC9000 air supply controller)
9200-127:
15W robot soldering head, aluminum housing,SLIM version with compressed air fitting for cooling the vibration unit and enhanced heating of soldering
tip incl. airtight heater holder for hot blow function, and soldering tip at your choice 1mm -5 mm
Diameter of tube air hose 4mm, diameter of main body Ø 27mm,
Diameter mount area Ø 22mm.
without connecting cable.(We recommend to use with ASC9000 air supply controller).
Soldering Tips:
9200-2010:
Soldering tip Ø 1mm
for 15W operated hand tool / soldering head
9200-2020:
Soldering tip Ø 2mm
for 15W operated hand tool / soldering head
9200-2030:
Soldering tip Ø 3mm
for 15W operated hand tool / soldering head
9200-2040:
Soldering tip Ø 4mm
for 15W operated hand tool / soldering head
9200-2050:
Soldering tip Ø 5mm
for 15W operated hand tool / soldering head
9200-2xxS:
Special soldering tip / customised shape
for 15W operated hand tool / soldering head
Spare Parts & Accessories
9200-3010:
Ceramic heater 24V/100W (red isolating tubes)
For 15 W operated hand tool / soldering head
9200-302:
Heater holder
9200-303:
Screw for heater holder
9200-310:
Hand tool cable 1.5m
9200-311:
Hand tool cable 1.5m with silicon heat protection
9200-315:
Hand tool cable 1.5m for finger trigger attachment
9200-320:
Foot-switch with 2m cable and connector
9200-330:
Separate tool stand for 15W operated hand tool
9200-331:
Sponge for tool stand 9200-330
9200-335:
Safety tool stand for 15W operated hand tool with hot gas function(9200-106 + 9200-107)
9200-903:
Finger trigger for finger-tip activation of ultrasonic power(instead of foot switch)
> fits to soldering tools 9200-101 , 9200-106 and 9200-107
9200-315:
Special connecting cable 1.5m for hand tool finger trigger attachment
9200-904:
Pistol hand grip attachment
For activation of the ultrasonic activity by trigger switch in the pistol grip(instead of foot switch)
> fits to soldering tools 9200-101, 9200-106 and 9200-107
9200-316:
Special connecting cable 1.5m for hand tools with pistol handgrip attachment
1900-9000:
Air Supply Controller ASC-9000 for defined air stream to soldering head.
Including
- pressure reducer from shop air to 2 bar
- electrical air valve to switch the air on and off
- adjustable air-flow meter 1 - 5 ltr/min.
> recommended for operation of soldering hand tools 9200-107 and robot soldering heads 9200-127 for hot blow function.
As an option, an external air pump can also be connected.
