CERAN® Hot Plates with thermostatic temperature control 50..500degree

CERAN® - hot plates 
CERAN® an unusual glass ceramic material which is highly resistant to breakage and temperature changes, free from distortion, permeable to ultra-violet light and highly acid-resistant. 

Construction:The low mass CERAN® plate is electrically heated over its full surface and is bedded into a stainless steel frame which is mounted on an internally insulated stainless steel housing. 

The temperature control system consists of an electronic regulator, activated by a NiCr-Ni temperature sensor (adjustable 50 ... 500"C) installed in a Aluminium pressurecast housing.  Warm-up time, e. g. 500'C in 8 minutes.  Four feet, which can be individually adjusted to an approx. height of 8 mm to ensure horizontal stability. Type 4A has 4 supporting rod holders (distance 100 mm) In Tpyes SR and EB, the electrical connection between the control housing and the hot plate is protected by a flexible metal hose.

Series EB - as built-in units for bench installation 
Types:  44 EB 
Watt:5700 
Volt:3x400 V, N+PE, 50-60 Hz 
W x H x D (mm):590 x 100 x 440 

CERAN®(mm):580 x 430 

A x B(mm):390 x 540 

weight:11,5 kg 

The conducting wire between control housing and hot plate measures 0,65 m.